MINARB

BENEFITS

• Ideal for both thinner and harder sheet metals.
• Installed either manually or by automated methods.
• May be used in punched or drilled holes.
• Available for sheet thicknesses ranging from 0.5 mm to 3.0 mm.
• May be installed near the edge of the sheet metal.
• Installs nearly flush with the sheet metal.

DESIGN GUIDE

PREPARING THE HOLE

Holes may be punched or drilled, so long as a tolerance of -0.00/+0.1 mm is maintained.

ASSEMBLY

It is essential to always use a punch of the proper size and shape. For best results, we recommend using a press. However, small quantities may be installed manually.

LOAD DIRECTION

Although the joined part may be affixed on either side of the bush, the best results are achieved when fastening is done on the shank side.

NOTE: STANDOFFS (MINIOFF)

When space is not a key concern, you will get better performance using the next size up in terms of the shank.

STANDARD MATERIAL

Mild steel.

STANDARD FINISHES

Natural or clear zinc plating with passivation.
Other materials and finishes available upon request.